
Professional Machinery Cleaning & Degreasing for Plants from Dehu Road to Lonavala
CNC machines, VMCs, presses, compressors and conveyors constantly release oil, coolant, grease and metal swarf. On machine bodies and the floor around them, this residue becomes a sticky, hazardous layer that hides leaks, attracts dust, makes guards and panels hard to read, and turns walkways slippery. Regular machinery degreasing keeps equipment visible, inspectable and safe to work around.
Our machinery cleaning crew works alongside your maintenance team. Once machines are isolated, we clean exteriors, guards, enclosures, chip trays, bases and surrounding floors with suitable degreasers, steam or controlled pressure washing, while protecting electrical panels, sensors and lubricated parts. The result is a machine shop that looks and works the way it should.
- CNC, VMC, press and conveyor exterior degreasing
- Chip tray, coolant sump area and swarf clean-up
- Protection of panels, sensors and bearings
- Done during PM windows or shutdowns
Why Machinery Cleaning & Degreasing Matters for Your Facility
Clean machines are easier to maintain. Leaks and cracks become visible, operators can read indicators and labels, and 5S and TPM programmes become easier to sustain. Removing oil from the floor around machines is one of the quickest ways to cut slip injuries in a machine shop.
Spot Leaks Early
Clean surfaces make oil and coolant leaks easy to find.
Support 5S & TPM
Visual standards are easier to maintain on clean equipment.
Reduce Slip Hazards
Oil-free floors around machines protect operators.
Improve Machine Uptime
Less contamination of sensors, slides and cooling vents.
What Our Machinery Cleaning & Degreasing Service Includes
- Machine body, guard and enclosure degreasing
- Chip tray and swarf removal
- Coolant spill and sludge clean-up around machines
- Conveyor and roller exterior cleaning
- Hydraulic power-pack area cleaning
- Compressor and pump room cleaning
- Machine foundation and pit cleaning
- Floor degreasing around each cell
- Cleaning of fans, vents and filters (exterior)
- Segregated disposal of oily waste as per your system
How We Carry Out Machinery Cleaning & Degreasing
Your maintenance team isolates power and air (LOTO), and we mask electrical panels, connectors and sensors. We then apply biodegradable degreaser, agitate with brushes and pads, and rinse with controlled-pressure water or wipe down, depending on the equipment. Oily wastewater and rags are collected separately and handed over to your hazardous waste system.
Recommended Cleaning Frequency
High-usage machine shops benefit from monthly exterior degreasing, with daily operator cleaning in between. A full cleaning of machines and pits is ideal during annual maintenance shutdowns.
Equipment & Materials We Use
- Biodegradable industrial degreasers
- Low-pressure and hot-water washers
- Steam cleaning units
- Oil-absorbent pads and granules
- Wet vacuums for coolant and sludge
- Masking and protective sheets
Free Site Survey
We visit your facility, understand the scope, safety rules and timings, and take photos.
Plan & Quotation
You receive a written cleaning plan, crew size, schedule and transparent quotation.
Safe Execution
Our supervised crew works with PPE, permits and the right machines, zone by zone.
Inspection & Report
Joint inspection, snag closure and a before/after photo report for your records.
Safety & Compliance During Machinery Cleaning & Degreasing
Industrial sites have real hazards, so every machinery cleaning & degreasing job is planned with safety first. Before work starts, our supervisor walks the area with your EHS or maintenance team, identifies risks such as moving machinery, electrical panels, chemicals, hot surfaces and work at height, and agrees controls in writing.
Our crews wear the PPE your site requires, including safety shoes, helmets, gloves, goggles, masks and high-visibility jackets. They follow your permit-to-work, lockout/tagout (LOTO) and confined-space procedures, and attend a toolbox talk at the start of each shift. Barricades and signage keep your employees away from wet floors and active work zones.
We use biodegradable and food-safe chemicals wherever possible, share MSDS sheets on request, and segregate waste into general, scrap and oily or hazardous streams so it can go into your authorised disposal system. At the end of the job, we hand over a before-and-after photo report that you can use for internal reviews and audits.
Industries That Rely on Our Machinery Cleaning & Degreasing
Our machinery cleaning & degreasing service is adapted to the needs of each industry, including its contaminants, hygiene standards, audit requirements and production schedules.
Automotive & Auto Components
Cleaning for vehicle plants, auto-component makers and tier-1/tier-2 suppliers.
See industry detailsEngineering & Manufacturing
Cleaning for engineering, machine-building and general manufacturing units.
See industry detailsSteel, Foundry & Metal Fabrication
Heavy-duty cleaning for fabrication shops, foundries, forging and sheet-metal units.
See industry detailsPlastics, Rubber & Packaging
Cleaning for injection moulding, extrusion, rubber, printing and packaging units.
See industry detailsMachinery Cleaning & Degreasing from Dehu Road to Lonavala
We provide machinery cleaning & degreasing across the Pune–Lonavala industrial corridor, including Talegaon MIDC, Somatne, Urse, Vadgaon Maval, Kanhe, Kamshet and Lonavala. Choose your location to see local details.
Choose How You Want to Work With Us
One-Time Deep Cleaning
A complete reset before audits, client visits, festivals or after construction.
Periodic Cleaning
Monthly, quarterly or half-yearly cleaning of high-level and hard-to-reach areas.
Annual Maintenance Contract
Daily housekeeping staff plus scheduled deep cleaning under one AMC.
Shutdown Cleaning
Large crews for Diwali, year-end and maintenance shutdowns, with tight timelines.
Machinery Cleaning & Degreasing: Frequently Asked Questions
Is pressure washing safe for CNC machines?
We use low-pressure or steam methods near sensitive parts and always mask panels, connectors and sensors. High pressure is used only on suitable surfaces such as bases and floors.
Who isolates the machines before cleaning?
Your maintenance team isolates power and air under your LOTO procedure. Our crew starts work only after a clearance from your supervisor.
What happens to the oily waste?
Oily rags, sludge and wastewater are collected separately and handed over to your authorised hazardous-waste disposal system.
Can machine cleaning be combined with preventive maintenance?
Yes. Many plants schedule our cleaning in the same window as PM activities, so machines are cleaned once and maintenance teams work on clean equipment.
How do I get a quotation?
Call us on +91 86006 17799 or WhatsApp us on +91 98901 22102, or use the enquiry form on our contact page. We arrange a free site survey, usually within 24–48 hours, and send a written quotation after the visit.
Other Industrial Cleaning Services
Book Machinery Cleaning & Degreasing Today
Free site survey and written quotation. Crews available 7 days a week.
